Add a soundtrack (and some fun) to your ride with BellBeats, a handlebar mounted bicycle bell and bluetooth speaker. Never miss a beat Add a soundtrack and a smile to your ride with BellBeats — a digital bike bell and Bluetooth® speaker that easily mounts to your bike's handlebar. Its high-quality Harmon speaker offers clear audio for music, navigation, and alerts. Eight pre-loaded bell sounds range from fun and friendly to urgent to help you communicate the right message to others while you ride. PRODUCT DETAILS - Bluetooth speaker streams music, podcasts, or audio navigation from connected phone - Eight pre-loaded sounds range from friendly to urgent for alerting others - Quality audio optimized by Harmon with up to six hours of music playtime - Alert tones are engineered to be easily located by others for less surpise and more smile - Easily accessible ergonomic controls control both bell and speaker - Digital four-bar LED battery gauge is easily visible - USB-C charge port with IP67 dust and water resistance rating - Includes mount and shims, belt clip, and USB-C charging cable, compatible with bars 25-31.8mm

- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting

- 120db electronic rechargeable bicycle horn with remote - USB 280mAh rechargeable battery charges in 1.2 hours and lasts approximately 30 days or 2500 uses - Charging indicator light shows red when charging, and green when fully charged - IP65 water and dust proof - Compatible with 22.2 - 31.8mm handlebars - Whistle, horn, and alarm sounds

Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Aluminum striker and clamp - Fits on 22.2, 24.0 and 25.4mm OD bars - Made in Japan

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 22.2mm handlebars - Weight: 31.5g

Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available - Mounts with steel strap and features lever strike operation - Fits bars 22.2mm to 31.8mm - Made in Japan

Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Mounts with steel strap and features lever strike operation - Fits bars 22.2mm to 31.8mm - Made in Japan

- Uses one 9v battery (not included) - Fits most handlebars

Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Mounts with steel strap and features lever strike operation - CD3171 and 3172 have matching domes and strikers - Fits bars 22.2mm to 31.8mm - Made in Japan

The Timber Model YEW bell is designed to alert other nearby trail users of your presence. Using a spring-loaded on/off switch, the bell can be turned on, ringing activated by the bikes motion, or it can be silenced when not needed. The Timber bell offers a friendly way to warn other trail users of your approach. - Spring loaded piston on the on/off lever for smoother shifting - Fits 35mm bars (includes shims for standard 31.8mm and 22.2mm bars) - A hinge pin in the bar clamp provides easier mounting and secure holding power

Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty

Coming in hot! This limited edition King of Ding II is laser-engraved "COMING IN HOT." Perfect for speed demons, messengers, cat6 champions, and anyone else who "can't stop, don't want to." The bell is made of solid brass and comes equipped with a brass striker for a loud clear ring that's sure to clear the path. The alloy mount is easy to install and fits 22.2 – 25.4mm handlebars.

Announce your presence with Portland Design Works' King Of Ding II Bell. This solid brass bell rings loud and clear. - Solid brass bell - Brass striker - Alloy mounting - Fits 22.2 - 25.4mm handlebars

Classically designed bicycle bell featuring modern materials and a robust machined-aluminum handlebar mount. The bell dome and striker are crafted from high-quality brass with a sturdy stainless steel spring. Its secure base quickly mounts to most modern bicycle handlebars (25.4mm or 22.2mm diameter) with a stainless steel Torx bolt. And its narrow design attaches neatly between other handlebar accessories. It provides a powerful ring that’s excellent for all cyclists and commuters alike. This bell is engineered to be extremely durable with excellent resistance to weather-related wear-and-tear. This lightweight and stylish ringer is the ultimate bicycle bell. - Compact, classic bell-shape construction for a high-quality sound - Bell and striker are made from high-polished brass - CNC-machined aluminum hard handlebar mount, designed for 25.4 - 22.2mm tube - Molded rubber shims add grip and fine tune fitting - Stainless steel hammer - Impressively loud ring - Weight: 34g

"Ding, ding, ding! Passing on your left." The timeless design and clear tone of the Courtesy Bell Classic is a fun way to be a better bike path citizen. Its elegant all metal construction and sophisticated good looks will get you noticed.

Drawing inspiration from Raijin, the Japanese God of Thunder, the Incredibell Raijin boasts a remarkable sound level exceeding 85 db., ensuring you're heard loud and clear. Crafted with exceptional quality at the forefront, every bell is a dedication to durability and superior performance. The Raijin with its ingeniously designed dinger can be rotated to any position. This gives you great flexibility in mounting the bell anywhere on your handlebar, making it convenient to use either your thumb or another finger to ring the bell. Fits 22.2 or 25.4mm bar.

Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Spring-loaded lever arm strike mechanism - Standard domes are 55mm wide and Mini domes are 45mm - Steel band clamps fits bars 22.2 to 26.0mm - Made in Japan

Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Spring-loaded lever arm strike mechanism - Standard domes are 55mm wide and Mini domes are 45mm - Steel band clamps fits bars 22.2 to 26.0mm - Made in Japan

Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Spring-loaded lever arm strike mechanism - Standard domes are 55mm wide and Mini domes are 45mm - Steel band clamps fits bars 22.2 to 26.0mm - HS: Headset version mounts on the fork, leaving more space on handlebars - Made in Japan

- Crane bells are some of the finest bells available - Timeless designs with a loud and clear tone - Features the Cat-Eye Flex-Tite bracket, which installs without tools on most areas of the cockpit. - Made in Japan

- Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available - Mini brass bell with alloy clamp - Headset spacer version includes a spacer to work with 1" or 1-1/8" steer tubes - Suzu: lever strike - 45mm in diameter

Our Trail Bell announces your presence while letting you keep both hands firmly on your grips and goes silent with just the flick of a switch. Fits all handlebars from 22.2 to 31.8mm.

Let people know you're coming through. And do it in style. When 'Hello' sounds more like 'Hey!' The Pinger Bell provides big sound in a small package. Providing 90 decibels of sound, it's the perfect addition to your e-bike handlebar. Product details: - Graphics inspired by the cities we ride in - Recommended for e-bikes - Includes attachment hardware - No tools required - Fits handlebars up to 31.8mm

Let people know you’re coming through—and do it in style. When 'Hello' sounds more like 'Hey!' The Pinger Bell provides big sound in a small package. Providing 90 decibels of sound, it's the perfect addition to your e-bike handlebars. - Loud 'ping' noise that reaches 90 decibels - E-bike recommended - Fits standard bicycle handlebar - Includes attachment hardware - Clamp: 22.2mm - Material: Stainless Steel

When 'Hello' sounds more like 'Hey!' The Pinger Bell provides big sound in a small package. Providing 90 decibels of sound, it's the perfect addition to your e-bike handlebar. Let people know you’re coming through. And do it in style. - Recommended for e-bikes - Includes attachment hardware - No tools required

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

- Designed with road drop bars in mind - Can mount on the brake hood, On cable housing, And on some flat bar levers (Levers need to have flat section less than 9mm deep) - Clamps on with a screw. Simply turn the bell dome to loosen and tighten - Reversible for right and left hand use - Does not use a spring loaded clip - Made in japan

Available with either polished brass or chrome plated dome. Striker can be adjusted for individual comfort. - Dome Diameter: 45mm (1.7") - Fits handlebars with 22mm – 25.4mm (.86" – 1") outside diameters

Let everyone know your coming with Sunlite's Ding Dong Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

Origin-8's Ping Multi-Fit features a compact design and a multi-fit, no-tool mount.

Origin-8's Time Clock Bell provides a wonderful sound and adds a touch of class to your handlebars. This great 55mm bell delivers the wonderful resonate sound of brass with all-metal mechanical parts.

You won't be taking a gamble when you purchase this bell! The agile downward movement of your thumb activates the friendly double ring of the solid brass dome, producing a beautiful resonating sound. You can mount the ACE on either side of the handlebar. Fits 22.2 or 25.4mm handlebars Dome material: solid brass

•Combines Ping bells and streamers •One bell on each end of the handlebar •Mounts inside handlebar under grips •Optional hand held use

Let everyone know your coming with Sunlite's Windmill Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed. And perhaps best of all, for added flair the windmill spins as you ride through the wind!

Let people know you're coming through. And do it in style. Round and round it goes. Spin this bell to say 'Hello.' Spice up your handlebars with our unique graphics and bold colors. Product details: - Easy-to-push lever creates a friendly ringing sound - Attaches to a standard 22.2mm handlebar - Includes attachment hardware

Let people know you're coming through. And do it in style. The perfect way to say 'Hello' Or 'hey there,' 'coming through' and 'sup'. We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Product details: - Proprietary spring ringer - Fits standard bicycle handlebar - Includes attachment hardware Specs: - Clamp: 22.2mm - Material: Brass

Round and round it goes. Spin this bell to say 'Hello.' Spice up your handlebars with our unique graphics and bold colors. Let people know you’re coming through—and do it in style. - Checkerboard graphic features reflective paint for added fun and safety - Easy-to-push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware - Mounting Location: Handlebar - Clamp: Universal - Material: Aluminum

The perfect way to say 'Hello.' Or 'hey there,' 'coming through' and 'sup.' We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Let people know you’re coming through—and do it in style. - Proprietary spring ringer - Fits standard bicycle handlebar - Includes attachment hardware - Mounting Location: Handlebar - Clamp: Universal - Material: Brass

Honka honka. How you say 'hello' in Electra Also translates to 'hey there,' 'coming through,' and 'sup.' Electra bugle horns are arguably the best way to let others know you're around. Product details - Arguably the most fun way to alert other riders or pedestrians of your presence - Classic bugle-style horn has a deep tone - Easily mounts to bicycle handlebars without tools - Classic steel horn with a large rubber bulb and a gloss painted surface - Plastic bracket with silicone strap fits a wide variety of handlebars

The best thing to happen to handlebars since grips. - Easy to push lever creates friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

Let people know you're coming through Do it in Electra style with this e-bike friendly bell that rests perfectly underneath most e-system displays. Bonus: This bell puts in overtime and can track your electric bikes' location with its Apple® AirTag® device compatibility. Product details: - Provides security for your bike featuring a hidden compartment compatible with Apple® AirTag® brand tracking devices (tracker not included)? - Fits standard bicycle handlebars - Includes attachment hardware - Recommended for e-bikes - Apple® and AirTag® are trademarks of Apple Inc. This product is not endorsed or approved by Apple Inc.

The perfect way to say 'Hello'. Or 'hey there,' 'coming through,' and 'sup'. We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Let people know you're coming through. And do it in style. Details: - Cheerful 'ding-dong' doorbell-style ring - Fits standard bicycle handlebar - Includes attachment hardware

Let people know you're coming through Do it in Electra style with this e-bike friendly bell that rests perfectly underneath most e-system displays. Bonus: This bell puts in overtime and can track your electric bikes' location with its Apple® AirTag® device compatibility. Product details: - Provides security for your bike featuring a hidden compartment compatible with Apple® AirTag® brand tracking devices (tracker not included)? - Fits standard bicycle handlebars - Includes attachment hardware - Recommended for e-bikes - Apple® and AirTag® are trademarks of Apple Inc. This product is not endorsed or approved by Apple Inc.

•Classic Bugle design •Clamp fits most handlebars

- 65mm Bell in the form of a bacon cheese burger - Adjustable handlebar mount - Universal nylon mount - Ringer style mechanism - Function: Lever

•Classic Straight design •Clamp fits most handlebars •10" length

Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring. - Fits handlebars with 22.2mm - 31.8mm (.87-inch - 1.25-inch) outside diameters - Dome Diameter: 44mm (1.6")

“Ding, ding, ding!” Let your fellow path users know you’re coming with the small but might Courtesy Bell. It’s a simple and stylish addition to any bike.

Dimension Bugle Horns are perfect for those who want to add a touch of humor to their bike. - 7.5 inches in length

Dimension Bulb Horns offer classic style and personality. - 9 inches in Length

The perfect way to say 'Hello.' Or 'hey there,' 'coming through' and 'sup.' We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Let people know you’re coming through—and do it in style. - Easy-to-push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware - Mounting Location: Handlebar - Clamp: Universal - Material: 7075 Aluminum Alloy

•Parrot Pirate •Fits most handlebars •Easy installation

- Great novelty horn - Fits most handlebars

Powder-coated black brass bell that produces a loud, clear, and pleasant sound to alert pedestrians. - Split clamp allows the bell to be installed anywhere on the handlebar without removing grips or shifters. - Fits 22.2 to 28.6mm handlebars - Size: 35mm - Material: Brass

A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters

The Omnibell has an adjustable band clamp. Its ingeniously designed dinger can be rotated to any position. This gives you flexibility in mounting the bell anywhere on your handlebar, making it very convenient to use either your thumb or another finger to ring the bell. Dome Diameter: 34mm (1.34") Fits handlebars with 22mm – 31.8mm (.87" to 1.25") outside diameters

- Adjustable handlebar mount - Universal nylon clamp - Ringer style bell - Function: Lever

An incredibly loud brass bell (approximately 60 db) from CatEye meets their FlexTight mounting band for mounting versatility across all types of handlebars. The bright, clean sound of brass alerts other pedestrians and riders to your presence.

Let people know you're coming through. And do it in style. The perfect way to say 'Hello' Or 'hey there', 'coming through' and 'sup'. We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Product details: - Cheerful 'ding-dong' doorbell style ring - Fits standard bicycle handlebar - Includes attachment hardware