Skip to main content

 

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Bottom Brackets

$379.00 - $479.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The ITA for SRAM DUB Road comes in two bearing options. The first option is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second option is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: Italian BB - Opening diameter: Threaded - Shell width: 70mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacer tube
$54.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
$54.00
The SRAM DUB bottom bracket series has a simple job- to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard - Significantly lighter than GXP system
$46.00
The new SRAM DUB bottom bracket series has a simple job: connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Significantly lighter than PFGXP system - Easier installation by allowing you to press the bearing cups into the frame
$54.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Compatible with Cannondale Ai frames - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
$63.00
Downhillers and freeriders need tough gear that can handle the abuse of big air and huge drops. TruVativ's Giga Pipe Team DH Bottom Bracket uses four sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.
$50.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
$54.00
The new SRAM DUB bottom bracket series has a simple job: connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Greater bearing durability - Easy installation - PressFit cups for lighter weight
$263.00
- Ceramic bottom bracket for DUB spindle cranks Specs: - BB Shell Type: BB92 - BB Shell Width: 89/92mm - BB Bearing: Ceramic - Crank Spindle Diameter: 28.99mm - Interface: DUB - Cup Diameter: 41mm
$37.99 - $45.99
The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard - Significantly lighter than GXP system
$32.00
A tough bottom bracket that will go as hard as you. The PowerSpline has a heat-treated chromoly 12 spline spindle to make sure it can go the distance with even the most demanding riders. SPECIFICATIONS: - BB-FRAME INTERFACE: English/BSA 68E/73mm, English/BSA 68mm, English/BSA 73mm - CHAINLINE: 46.0mm, 48.5mm, 51.0mm, n/a - SPINDLE LENGTH: 108mm Spindle, 113mm Spindle, 118mm Spindle - SUPPORT E-TYPE FD: n/a, Yes - CRANK-BB INTERFACE: Power Spline - BEARING TYPE: n/a - SPINDLE DIAMETER: n/a - CUP MATERIAL: n/a - WEIGHT (G): 363 - WEIGHT BASED ON: BSA 73mm, 113mm spindle
$72.29
Origin8's Revolvr BB86/92 Thread-Together Bottom Bracket provides a secure and stable shell interface for smoother operation and extended bearing life. Hybrid AL6061/Nylon fiber cups offer a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable. Models are available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles. - Replaces all standard BB86/92 press-fit bottom brackets - Shell: 86-92mm x 41mm - Interface: BB86/BB92 - Cup Material: AL6061/Nylon Fiber - Weight: 103g
$76.49
- Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are both serviceable and replaceable - Designed for installing Shimano HTII 24mm, SRAM GXP 22/24mm, or DUB spindle cranks into BB386 frames without the need for adapters - Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups - Shell: 86.5/92mm x 46mm - Interface: BB386/BB392 - Spindle Type: SRAM DUB 28.99mm - Cup Material: AL6061/Nylon Fiber - Weight: 135g
$50.99
Origin8's Revolvr BB386 Outboard Bottom Bracket features forged and CNC-machined AL6061 thread-in cups for a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable. - Designed for installing BB30 Wide or BB386 30mm spindle cranks into BSA threaded frames - For use with 30mm diameter cranks with a spindle length of at least 104mm - Shell: 68mm x 33.6-33.9mm - Interface: ISO/English or BSA Threaded (1.37" x 24TPI) - Spindle Type: BB30 Wide/BB386 30mm - Cup Material: AL6061 - Weight: 120g
$45.89 - $54.49
Forged and CNC machined AL6061 cups - Double sealed replaceable bearings - Fits 68mm and 73mm shell widths - 1.37" x 24T English thread - Alloy spacers included for chainline adjustment - Anodized and laser etched finish
$50.99
Aluminum cups - Fits BB86 and BB92 - Includes shims for GXP - SHIMANO Equivalent SMBB-72-41B / SMBB-71-41A - Shell: 86mm - Spindle Type: HT2/GXP - Weight: 103g
$7.19
- Fits 3-piece crank set - Includes right and left cup, lockring and bearings - English type - Shell: 68/73mm - Cup Material: Steel - Weight: 123 grams
$44.79
- Steel body - Chromoly spindle - Sealed bearings - Repair BB designed to work in frames that have stripped BB threads - Shell: 68mm - Spindle Type: Square Taper JIS - Weight: 360-370 grams
$144.25
The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 30mm spindle cranks in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames. Bottom Bracket Includes: - BB Cups with bearings - 2x - Silicone dust seals - 2x - 0.5mm crank spindle spacers - 2x - 1.0mm crank spindle spacers - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: Cannondale PF30A - Bottom Bracket Shell Width: 73mm Asymmetrical - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 91mm in 73mm wide shell - Crank Spindle Diameter: 30mm - Tool Pattern: 48.5mm x 16 notch - Weight: 158g
$79.89
Origin8's Revolvr PF30/BB386 Thread-Together Bottom Bracket provides a secure and stable shell interface for smoother operation and extended bearing life. Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable. - Designed for installing BB30 or BB386 30mm spindle cranks into PF30 or BB386 frames without the need for adapters - Shell: 68-86.5mm x 46mm - Interface: PF30/BB386 - Spindle Type: BB30/BB386 30mm - Cup Material: AL6061/Nylon Fiber - Weight: 120g
$25.49
- Designed for fat tire bikes - Chromoly spindle - Sealed bearings
$349.00
BB90 is the Trek oversized bottom bracket standard and is only found on Trek road bikes. The shell is 90.5mm wide and is designed to work with 24mm spindles and road cranks and have the bearings inside the shell. The CeramicSpeed Bearings come as two bearings, which are then pressed into the frame. Those two bearings consist of either CeramicSpeed Standard or Coated Bearings. Both feature super smooth, super-round CeramicSpeed Balls contained in hardened-steel races. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. -BB90 is simple and light. The standard is designed to work with 24mm spindles. The bearings work with Shimano and other 24mm cranks, like FSA. - The CeramicSpeed Standard Bearings last at least 3 times longer than other bearings. That's thanks to hardened-steel races and CeramicSpeed Balls that are 100% smoother & 15% harder than the ceramic competition. These bearings have a frictional drag of 0.3-0.4 watts per set, which represents an average 75% drag reduction compared to stock BBs. - The CeramicSpeed Coated Bearings reduce drag by 50% compared to Standard Bearings and an improvement in bearing life of 60%. In The Box: - 2 BB90 bearings - 2 seals - 2 dust covers with integrated spacers - 10ml syringe of All Round Grease - Sticker Sheet
$379.00
Shimano cranks fit into BB86 frames when you have this CeramicSpeed Bottom Bracket installed. The kit consists of two cups that are pressed into either side of the central opening. The cups come with CeramicSpeed Bearings installed. There are two versions. The first is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed Balls. The second version is our coated bearing, which uses those same CeramicSpeed Balls installed on coated, hardened-steel races for longer life and less bearing drag. This CeramicSpeed BB86 Bottom Bracket works with cranks that have 24mm spindles, including both Shimano and FSA. CeramicSpeed standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That represents an average 75% drag reduction compared to standard bottom brackets. The hardened-steel races feature the CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Bearings last at least three times longer than other bearings. Coated Bearings drop friction further and increase lifespan. The coated races see a 50% drag reduction and an improvement in bearing life of 60%. In The Box: - 2 bottom bracket cups with bearings installed - 2 dust covers with integrated spacers installed - Spacer tube - 10ml syringe of All Round Grease - Sticker sheet
$19.99
High performing square bottom bracket interfaces with English frames. - Fits square-taper spindle cranksets - Alloy adjustable cups - Includes 2 axle bolts
$479.00
BSA is another way of stating English threading. The initialization comes from Birmingham Small Arms, which made bicycles. English threading on road bikes mean a 68mm-wide, 34mm-inside-diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit allows you to fit 30mm cranks, like those from Rotor, to fit in the tight space of this 34mm spindle. Choose between two bearings types for the cups. Standard Bearings have low drag thanks to hardened-steel races and our CeramicSpeed Balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Note that the threaded extensions of this BB's cups that thread into the frame are thin, as they need to fit a 30mm spindle inside the cups. CeramicSpeed standard bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. That's thanks to balls that are 100% smoother and 15% harder than the ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings installed - 2 1mm spacers - 2 0.5mm spacers - 2 dust covers - O-ring - 10ml syringe All Round Grease - Sticker sheet - Spacertube
$49.99
- Road sets include bearings, shields, c-clips and wavy washer for bearing retention/tension - Mountain sets include bearings, shields, c-clips and spacer - Choose ceramic or stainless steel options
$100.28
Wheels Mfg solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Notes: - For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm. - Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH! - Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide - Crank Spindle Diameter: 30mm - Crank Spindle Length: At least 104mm - Weight: 102g
$212.00
Chris King ThreadFit 30 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #1 is designed to mate the ThreadFit 30 bottom bracket with a DUB MTB 28.99mm spindle - Spindle Interface Type: SRAM DUB - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English
$379.00 - $479.00
The PF30 standard is widely used. To make it compatible with Shimano and other 24mm diameter cranks, as well as improve the system, select this bottom bracket. The package comes with two cups and CeramicSpeed Bearings installed. The cups have extended inner sleeves and join with a center section, reducing the likelihood of creaking and increasing the reliability of the system while also eliminating spindle rub on internal cables. The cups mate with 24/22mm crank spindles. There are two bearing options. Both Standard and Coated Bearings feature super smooth CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated Bearings have an additional feature: a 3-micron thick metallic layer over the races. This addition makes the races smoother and harder, lowering drag and increasing life. The CeramicSpeed Standard Bearings have only 0.3-0.4 watts of frictional drag per set, an average drag reduction of 75% compared to stock bottom brackets. This is the result of great design, including hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer. The CeramicSpeed Coated Bearings last even longer and feature even lower drag. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings. All Round Grease is installed in the bearings. It can be replaced for lower-drag TT and Track Grease or higher-durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker sheet
$141.95
T47 threaded BB cups to run 30mm spindle cranks on T47 frames. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68 – 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.2mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16-notch
Page 1 of 9 Next page