Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Fenders

$37.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology.
- High performance dual compound plastic
- Easy quick-release-fastening by pre-adjusted powerstrap
- 2 joints for optimized adjustment to all frames
- Optimized dirt protection
- 27.5+ and 29-inch wheel compatible

$37.99
The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 26-inch and 27.5-inch wheel compatible

$78.99
Mudguard in pure form: EDGE AL guarantees city and trekking cyclists ideal splash protection on the road. This aluminum mudguard mounts close to the tire and offers great stability, although it is only attached at three points. No load rack is necessary to attach EDGE AL. With a purist matte-black look and an angular profile, EDGE AL integrates itself almost invisibly into the frame.
- Urban fender set
- Sturdy aluminum profile design for urban bikes
- Black U-stay
- Includes accessory parts and stays
- Weight: 568g

$37.99
The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 27.5+ and 29-inch wheel compatible

$20.00
The Fender Flute fits inside most forks and attaches to standard front fender tabs for mounting fenders closer to the wheel.
- Especially helpful for fender mounting on suspension-corrected forks
- Threaded M6 holes at 10mm intervals for fine-tuning fit
- Bolts and lock washers included

$24.99
SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.

$22.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

$24.99
Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.

$26.99
Keep your little rider dry and clean with SKS's Rowdy fenders. They're compatible with a wide variety of frame types and feature durable mounting brackets for worry-free use.

$67.99 - $69.99
Ride in any weather
The Bontrager NCS fender is everything you want in a fender. It installs in seconds, is available in a variety of sizes to fit various bikes, and offers full coverage to keep you dry. The no-cut design includes everything you need for easy installation and it even comes with an integrated Blendr rear light mount.
Product details
- Fully assembled fenders that install in minutes
- Integrated rear Blendr light mount for use with Bontrager Flare lights
- No-cut struts allow quick strut adjustment for proper tire clearance
- Double-back strut on rear fender adds support and stability
- Made of lightweight yet super-durable polycarbonate
- Stainless steel hardware resists rust
- Four sizes available to accommodate most bike and tire configurations

$19.95
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

$34.99
Front Fender:
• Front fender made of durable all-weather polymer
• Mounts to most suspension and rigid forks
• Fits oversized tapered steer tubes along with small and standard sizes. (18.5-34.5mm ID)
• Extra-wide profile for 3-5" wide tires
Rear Fender:
• Minimalist seat post fender made of durable all-weather polymer material
• Quick-release mount snaps on and off in seconds
• Wide profile design
• Features an adjustable fender angle to fit most bikes
• Extra wide profile to fit 3-5" tires

$22.95
Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.

$59.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$27.95
Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.

$72.99
- Color: Black
- Maximum Tire Width: 35 mm
- Fender Width: 45 mm
- Wheel Size: 700c
- Material: Aluminum
- Requires Eyelets?: Yes

$62.99
Keep your tail clean
On some rides you want a fender. The Universal Fat Bike Fender is designed to offer quick and easy installation so that riding with a fender can be a game-time decision. The versatile attachment clamp securely mounts to most seatposts, and the front and rear set are designed to work with tire widths from 3.0 to 4.75 inches.
Product details
- Front and rear fender set fits tire widths from 3.0 to 4.75 inches
- Versatile fender offers simple and effective protection from the elements
- Universal attachment clamp designed to fit most seatposts
- Quick and easy installation or removal
- Trim lines on front fender offer customizable shape to fit tires and bike

$10.89
- Attaches to saddle rails
- Quick and easy to install and remove
- Fat Butt, a wider version for fatbike applications
- Road/CX narrower for road and cross bike applications

$24.99
Easy-to-install rear fender for your fat bike.
CONSTRUCTION
• Virtually unbreakable polypropylene body
MOUNTING SYSTEM
• Adjustable rubber straps mount to down tube
• 100% recyclable
• Ships and merchandises as a flat sheet and snaps onto the included seat tube bracket
• Hardware included
• Weight: 190 grams / 6.7 ounces

$58.99 - $71.99
Fender set made of robust sandwich construction
A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion.
Stylish driving fun with a safety system
The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts.
- Aluminum/plastic sandwich construction
- V-struts with fixed bridges for flexible adjustment
- ASR safety system
- Bottom bracket cutouts
- Made in Germany
- Tire width in inches: 0.8"-1.1"
- Tire width in mm: 20-28mm
- Front mudguard length: 680mm
- Rear mudguard length: 1185mm

$49.99
If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray.
- 6061 aluminum blades
- 150mm mudflaps for extra coverage
- Adjustable stainless steel stays create a secure fit on any style recumbent
- Eyelets Required?: Yes
- Release Tabs on front fender for added safety
- Wheel size: 26”
- Max tire size: 26" x 1.5"(50mm) / 26" x 1.9"(60mm)

$49.99
If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray.
- 6061 aluminum blades
- Stainless steel V-stays and hardware are pre-installed and disc brake compatible
- 100mm mudflaps for extended coverage
- Release Tabs on front fender for added safety
- Eyelets Required?: Yes
- Wheel size: 20”
- Max tire size: 20" x 1.5" (50mm) / 20" x 1.9" (60mm)

$17.99
Sunlite's Seatpost Clamper fender simply clips on to your seatpost and provides you with good coverage for those sloppy rides. It'll fit almost any seatpost.

$74.99
Turn your bike into an all-weather vehicle with Planet Bike's Cascadia Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$6.95
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

$29.99
The Grunge Rear seat post mounted fender is designed with an 85mm wide profile to shield your rear end from spray, mud and crud. It'll keep you clean on your commute or when ripping around on singletrack.
- Durable all-weather polypropylene blade
- Quick release seatpost mount attaches and removes in a snap
- Features fender angle adjustability to fit most bikes and dial in spray protection
- Eyelets Required?: No
- Wheel size: 24", 26", 650b, 29" and 700c
- Fender width: 85mm wide x 460mm long
- Max tire width: 2.25"
- Weight: 174 grams

$25.99
•All weather plastic
•Front compatible with suspension forks
•Rear fender mounts on seatpost
•Fits 24-26" wheels

$49.99
If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray.
- 6061 aluminum blades
- 150mm mudflaps for extra coverage
- Adjustable stainless steel stays create a secure fit on any style recumbent
- Eyelets Required?: Yes
- Release Tabs on front fender for added safety
- Wheel size: 700c
- Fender width: 43mm
- Max tire size: 700c x 35mm
- Weight: 418 grams (rear)

$69.00
Made of durable polycarbonate and featuring the highest quality hardware of any fenders in their class, Portland Design Works' Poncho Fenders keep you safe from spray from head to toe. They use thick 6mm stays for extra rigidity, sturdy rubber mudflaps for extra coverage, and front safety release tabs to ensure your wheels keep turning even if debris gets lodged between the fender and tire.
The Road size Poncho Fenders will fit close clearance road bikes with 700x23 tires maximum or road bikes designed to take fenders with up to 700x25 tires. They are designed to fit under caliper brakes and forks, and include add-on mounts for bikes that lack eyelets.
- 30 mm wide to fit 700x23 tires maximum
- Pre-installed stays and brackets for faster mounting
- Weight: 454 g (16 oz)
- Lifetime PDWarranty
The City size Poncho Fenders are designed for touring and CX bikes with 700x35 tires maximum. They come with all necessary hardware to mount to bikes with brazed on eyelets.
- 45 mm wide to fit 700x35 tires maximum
- Pre-installed stays and brackets for faster mounting
- Weight: 567 g (20 oz)
- City size installation manual (PDF)
- Lifetime PDWarranty

$13.00
Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks.
- A low-profile, easy-install fender that keeps riders clean in various conditions
- Fits wide range of wheel sizes
- Tool-free installation
- Zip ties not included. Color zip tie options available through Problem Solvers.
Page 1 of 5
Next page