For a thank you from the future you Quickly and easily apply this assembly lubricant to any fastener on your bike to help prevent corrosion and seizing. Your bike (and mechanic) will thank you because we all know that a little assembly lube now can save a lot of elbow grease down the road. Product details - The anti-corrosion and anti-seizing formula is compatible with thread lockers - Precise applicator tip makes it super easy to apply - Pleasing cinnamon scent - Apply directly to any threaded fastener on the bike, usually one drop is enough - 4 fl oz (118mL) bottle is easy to use with a precise applicator tip - Keep out of reach of children and do not ingest

Muc-Off Device Cleaner spray bottle contains an advanced pH balanced, eco-friendly cleaning formula that gives a streak-free finish for phones, tablets and laptops. It’s never been easier to keep your devices bacteria-free with the Muc-Off treatment. - Gives devices a streak-free finish - Formulated using deionized water and is pH neutral - Store in a cool dry place

Bike Protect is the ultimate liquid bicycle protection. Preserve and freshen your bike with Bike Protect's incredible water dispersing action! It's a perfect 'all over', after-wash corrosion inhibitor due to its extremely high oil content. This increased oil content creates the finest bike protection spray on the market. It drives out moisture and leaves a sparkling, non-sticky protective layer on your frame, drive chain, metal parts, and paintwork. It's ideal to spray onto your chain to drive out moisture before you apply any of the brilliant Muc-Off chain lubes. Bike Protect doesn't just disperse water after you've given your bike a good clean. It also prevents dirt adhesion between washes and reduces future maintenance time as well as helping reduce friction, wear, and energy consumption. - High performance formula leaves dry, non-sticky, protective film - Safe on frame, metal parts, plastics, rubber, paint, and carbon fiber - Drives out excess moisture - Prevents dirt adhesion - Light lubricant coats moving parts - Quick and easy to use - Aerosol Spray - Ideal for Road Cycling, Cyclocross, MTB, & Fat Bikes - Provides the ultimate performance in freezing conditions - For chains, cables, shifters, derailleurs, pedals, & cleats - Incredible durability - Pipette system for easy application

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

The Ultimate Wear Reducing lubricant for E-Bikes. Based on our own award winning Synergetic lubricant, the first and only wet lube to record a 0.0% wear block in Zero Friction Cycling lab testing, Synerg-E takes our patent pending Tungsten Tribofilm Technology and blends it into a higher viscosity lubricant optimized for the high torque experienced in E-Bike drivetrains. E-bike chains experience more than 2X the internal pressures of traditional bike chain, and are capable of wearing out expensive drivetrain components like chains, chainrings, and cassettes at more than twice the rate of traditional bicycles. By increasing viscosity and adding Calcium Sulfonate to the mix, Synerg-E gives up roughly 1 watt of pure efficiency to Synergetic, while nearly doubling the oil film strength to ensure the lowest rates of chain and drivetrain wear of any lubricant currently available. As with all SILCA lubricants, Synerg-E uses only the finest, environmentally friendly pure synthetic base oils with additives approved as safe by the EPA and Bureau of Land Management. Synerg-E contains NO PFAS or other Fluorinated chemicals.

Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.

Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels

Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.

The Muc-Off All-Weather Chain Lube is a high-performance synthetic lubricant. The unique water repellent, non-fling formula penetrates deep into the chain link, to create a durable protective coating which guards against corrosion metal-to-metal wear. A unique blend of extreme pressure additives ensures the lube can stand up to even the toughest of rides. Muc-Off's formula provides lubrication for long-distance, on & off-road riding in all conditions. - Ideal for MTB, Road, Cyclocross and Commuting - Suitable for use in all weather conditions - Added protection against contaminants - Provides smooth and quiet gear shifting - Reduces friction and improves efficiency - Derived from renewable sources - Can be applied to chain, cables, shifters, derailleurs, pedals & cleats - Pipette system for easy application - Readily Biodegradable* - Integral UV tracer dye - aids accurate application to ensure total protection. *Only contents are readily biodegradable.

The industry's original and most versatile dry-style bicycle lubricant is now formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free, sets up with a dry ‘wax-like’ film, attracts less dirt and grime, and delivers a low coefficient of friction over long re-lubrication intervals. Dry Lube is especially recommended for riding on or off-road in dry, dirty, dusty environments, yet it holds up well in moderately wet conditions. Dry Lube can also be used on derailleurs, shifters, cables, and brake pivot points. Finish Line's Dry Lube provides optimum drivetrain efficiency without attracting an excessive amount of abrasive contaminants. Features: - Formulated with Non-Stick Ceramic Technology - Quickly sets up dry and clean - Low surface tension - 100% Fluoro-free Benefits: - Lowers friction, improves pedaling efficiency, and reduces wear - Minimizes the attraction of abrasive contaminants - Easily penetrates chain pins and coats pivot points - Meets the highest standards of biodegradability

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

Chill Zone™ is arguably the industry's most advanced rust-busting penetrating lubricant. It simply works like magic! Before giving up on a frozen crank bolt, a rusted derailleur spring, a seized seat post, or discarding your rusted chain, give Chill Zone™ a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. A special refrigerant propellant freezes metal to as low as -50°F/-45°C. This causes contraction of the metal and creates micro-cracks in the corrosion and galvanically fused metal parts. A penetrating release agent then breaks down and flushes out the rust. With Chill Zone, most seized parts regain full functionality.

Keep your brakes performing at their best with Avid's Assembly Grease. They're compatible with all Avid disc brake seals. You'll get a 1-ounce jar of grease.

Uses: - Bearing Grease - "Wax" (application style) Lube - Bike Wash - Degreaser - Rust Remover - Rust Preventer - Anti-Seize - Paint Protectant - Metal Polish - Leather Conditioner Performance: - Substantially reduces friction improving pedaling, shifting and drive train performance - Sheds water - Clean, Lube and Protect with one product - Improved lubrication and wear resistance even when run dry - Temperature performance range from -48F to +600F - Seasons chains and cables after 3-4 applications - State of the art penetrating characteristics - Road, Track, Gravel, CX, MTB, BMX & eBike - Motorcycles - Skateboards Technical: - State of the art Sub-Micron formulation enables the product to be run wet or dry for all riding conditions - Not vegetable oil or vegetable ester based. Will not dry out or gum up - No thermal decomposition even in extreme riding conditions - No Petroleum - No Alcohol Environmental: - Green Engineered - Bio-based Product - Non-Toxic - Biodegradable - USDA Certified - Made in the USA with USA raw ingredients Meets or Exceeds: - MIL-PRF-6340E ASTM D93 Flash Point - MIL-PRF-6340E ASTM D445 Kinematic Viscosity 104 F - MIL-PRF-6340E ASTM D4172 Wear Preventative Characteristics - MIL-PRF-6340E ASTM D5620 Load Carrying Capacity Jaw Load - MIL-PRF-6340E ASTM Corrosion Production - ASTM D 5183, Determination of the Coefficient of Friction for Lubricants: No Fail

Finish Line's Mineral Brake Fluid is formulated specifically for bicycle brake systems requiring mineral oil. Features no compromise leading edge chemistry to provide superior fluid life and braking performance. Formulated with a low viscosity base oil to yield superior level response, pad retraction, and consistent performance through a full range of operating temperatures. Finish Line Mineral Brake Fluid was specifically engineered for use in bicycle hydraulic disc brake systems. When you are serious about getting the most out of your braking system, Finish Line Mineral Brake Fluid is a great choice. - Specifically engineered for use in bicycle hydraulic disc brakes - Provides maximum fluid life and braking performance, even at low temperatures - Prevents foaming and overheating

RockShox's PM600 Military grease is great for suspension rebuilds. It delivers excellent shock feel, and keeps your gear running at its best. • Used as an assembly lubricant for dust seals, rebound dampers, spring top caps, air springs, and compression damper top caps • 500+ degrees melting point • Soluble in suspension fluid

- Advanced fluor-polymer polish and protectant - Removes imperfections and fills minor scratches - 3 wax blend for long lasting, ultra deep shine - Clear coat safe, no powdery white residue

Help your bearings run smoother and longer with Finish Line's Ceramic Grease. Its special blend of ceramic particles, Teflon and synthetic oils helps lube your bearings and dissipate heat, guaranteeing longer life and better function. Plus, it works great on stems, posts, cables and other threaded assemblies, too. - Optimizes performance and efficiency of bottom brackets, hubs and headset bearings - Use on stems, seat posts, cables and any threaded assemblies - Prevents rusting even when exposed to salt water - Clear and non-staining

- 3-In-1 Bio-degreaser, hand cleaner, and stain remover - 100% Natural, no citrus, palmas or petroleum

- Highly concentrated. Activate with water for incredible results or dilute for lighter degreasing tasks. - Engineered to fight its way to metal surfaces and stay there, then attack and break free the bonds holding oils, soils, and grime in place, and finally dissolve and contain to carry it all away. - Safe on any material, fully biodegradable, solvent-free, plant-derived, and zero-VOC. Degreaser 13 is a highly concentrated degreaser engineered for use with water to tackle tough degreasing tasks. Developed from scratch, specifically for the challenges of bicycle drivetrain degreasing, the advanced formula is engineered to fight its way to metal surfaces and stay there, then attack and break free the bonds holding oils, soils, and grime in place, and work together with water to dissolve and contain to carry it all away. Activate with water for incredible results on tough jobs or dilute for lighter degreasing tasks. Fully water soluble and further activated by scrubbing, agitation, and rinsing, the result is a spotless residue-free drivetrain. The advanced formula is also safe to use on any material, fully biodegradable, solvent-free, plant-derived, and zero-VOC.

- Makes drivetrain cleaning quick, easy, and safe. Perfect in the Chain Pig! - Incredibly effective pre-activated formula quickly removes oils, soils, and grime. - Safe on any material, biodegradable, solvent-free, plant-derived, and zero-VOC. Developed specifically for our grime-devouring Chain Pig chain cleaner, Pig Juice is an impressively effective and economical degreaser/cleaner that makes bicycle drivetrain cleaning quick, easy, and safe for anyone from novice to professional. Pig Juice features an advanced pre-activated formula that quickly penetrates & loosens, removing oils, soils, and grime with less scrubbing & rinsing, and leaves spotless residue-free parts. Free of harsh chemicals, gentle enough to use on any material, fully biodegradable, fragrance-free, dye-free, solvent-free, plant-derived, and zero-VOC.

- Ultra durable, long distance chain lubricant - Excel in long distance wet or muddy conditions - It penetrates deep into the chain links core to provide long lasting lubrication and total protection - Extreme pressure additives coat every part of the link to provide silky smooth gear change and ultra efficient drivetrain

Recommended by DT Swiss for lubrication of Ratchet mechanisms found in DT's Ratchet, Ratchet EXP and Ratchet LN hubs

Buzzy's Slick Honey has a superior ability to reduce sliding friction, making it ideal for lubricating o-rings, seals, bushings, and any other sliding or pivoting parts. Try it on your bike and you'll see why major suspension fork manufacturers like Rock Shox, Fox Racing and White Brothers use Slick Honey in their service departments.

Keep your bike running smoothly with Sunlite's Dry Lube w/Silicone. It's silicone based, so you can use it on metal, plastic, rubber, almost everywhere. Being a dry lube, it doesn't attract dirt and grime, either.

E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.

The great thing about wax-type lubes is that the shedding action of wax keeps parts cleaner during most riding conditions. Finish Line's Wax Lubricant is a unique formulation that features DuPont's Krytox, a highly advanced, thermally stable lubricant. Its specialized paraffin waxes set up dry and hard to repel grit and grime so your drivetrain runs silky-smooth and stays clean.

- The factory standard grease for leading bike and bearing manufacturers that exceeds the unique and demanding requirements of bicycle bearings - Prevents wear and distortion in headsets, hubs, and bottom brackets

- Creates a dry ceramic coating for increased durability and performance in dry condition - Excels in dry and dusty conditions - Biodegradable - Integral UV tracer dye and UV torch to aid accurate application and ensure total protection

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

RockShox Dynamic Seal Grease - Recommended for rear shock service

Deep penetrating formula works quickly to remove stubborn grease and grime from drivetrains. Wipes away with no rinsing required

- Foil sealed bottles to ensure freshness of fluid

For a clean, smooth-pedaling drivetrain, look no further than Finish Line's Ceramic Wax Lubricant. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals for maximum durability and convenience. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line! - With each application the ceramic coating is enhanced, ultimately providing the durability of many oil-based lubricants - No wetness or stickiness so dirt and grime will not be attracted or absorbed by the lubricant - Helps avoid abrasive wear allowing parts to run more smoothly and last longer - As the white ceramic particles embed themselves on the chain they will displace grime, causing a grey or black film to form on top of the wax coating. Over 2-3 applications this will lessen or cease. This discoloration is normal and will not compromise performance.

- Improves braking performance - Treats pads and rotors to reduce brake squeal - Prolongs disc pad and rotor life - Rapidly removes brake dust, oil, grease, brake fluid and grime - Re-hydrating formula that's acetone free to preserve braking components - Safe to use on both bicycles and motorcycles

Showroom™ Polish & Protectant with Ceramic Technology delivers maximum luster, it repels water, and prevents grime buildup. Your bike and components will stay clean for longer intervals. Showroom is safe for use on clear coat, carbon fiber, aluminum, titanium, steel, chrome, and stainless steel. Simply spray on and let sit for 10 seconds. Then wipe off with a clean rag. Due to Showroom’s proprietary formulation there is no need to pre-wash the bike. Enjoy the shine! Showroom Polish & Protectant will: - Clean frames and components without a prewash - Protect the bicycle from water and perspiration - Prevent a buildup of grit and grime - Keep your bicycle looking new

 An instant bicycle suspension performance booster. WPL ForkBoost lubricates and cleans bicycle suspension seals to eliminate stiction, remove dirt, and lengthen lifetime of the seal. Apply ForkBoost externally to the dust seals of bike suspension by coating the stanchion, pumping the suspension, and wiping away extracted dirt. ForkBoost is fully compatible with rubber and rubber derivatives, causing no risk of damage to the seals, seal swelling or cracking. Use ForkBoost internally during fork rebuilds, to soak foam seals and cut grease to specified thickness - Premium bio-based formula made with natural ingredients - Biodegradable, non-toxic, PTFE-Free formula - Cleans and lubricants bike suspension seals - Removes unwanted dirt and contaminants from suspension seals - Apply externally to dust seals to lengthen seal lifetime

Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!

WPL Bio-Solvent Degreaser (473ml) is a powerful biodegradable solvent degreaser for eliminating contaminants and grease build-up from drivetrain parts. The non-toxic, petroleum-free, bio-based formula easily dissolves stubborn contaminants, leaving the drivetrain clean and efficient. Can be sprayed directly onto bicycle parts or used for isolated cleaning in chain cleaning tools or degreaser bins. - Premium bio-based formula made with natural ingredients - Powerful solvent easily removes grease and grime - For use on drivetrain parts with stubborn grease build-up and contamination - Easy spray trigger penetrates deep into moving parts

Mineral-based racing fork oil is designed for all high-performance cartridge and standard-type forks. Shear-stable, high viscosity index formulation maintains film strength and utilizes industry-leading anti-wear chemistry to reduce wear. The advanced, proprietary additive system prevents stiction and reduces running friction while minimizing foaming and air entrainment. Ultra-clean formulation eliminates corrosion and conditions seals. For all modern off-road and on-road upside-down forks. Also for most late model applications with standard fork applications. Features: - Designed for high-performance applications. - Reduces overall friction and prevents stiction. - Shear-stable, high viscosity index formula maintains film strength and eliminates wear. - Maintains optimal damping performance by minimizing foaming and air entrainment. - Keeps internals clean while eliminating corrosion and conditioning seals.

ProGold ProLink is designed to shed dirt, mud, and abrasives, and reduce tacky build-up in all climates. - Smoother shifting, quieter drive train - Repels moisture and reduces oxidation and corrosion - Disperses water and resists wash-off - Will not build up or get tacky - Works well in all climates - Longer chain and sprocket life - Long-lasting - Can be used as a dry lubricant - Environmentally friendly - Available in: 4 fluid-ounce drip, 8 fluid-ounce aerosol, 16 fluid-ounce pump, and 32 fluid-ounce.

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

- Makes your bike shine like new and keeps it that way. - Biodegradable formula cleans, polishes, and protects in one step. - Also great for dropper posts, suspension, and for seating tire beads. The original bike polish, Bike Lust's proprietary silicone-based formula includes a biodegradable cleaning agent. Bike lust goes on wet, quickly cleaning light dirt and grime as it polishes, and then dries to a beautiful protective coating. Works on any surface or material in one simple step making your bike look like new and future cleaning easier! Also great for dropper posts, suspension, and for seating tire beads. Bike Lust can be used on all types of materials and finishes including carbon fiber and matte finishes. It's also fantastic on tires to help shed mud and dirt as you ride.

Low temperature lube for use in extreme cold conditions. Lube has modified congealing point to eliminate unnecessary drag. - Unique wax/water emulsion bicycle chain lube contains more than twice as much wax as solvent based wax lubes, so it lasts more than twice as long as traditional lubes - Does not attract dirt or grime to your chain and no degreasing is required or recommended - 100% biodegradable

Smartphones are proven to be 7 times dirtier than a toilet seat! That's where the Muc-Off Antimicrobial Screen & Device Cleaning Kit comes in, to help keep bad bacteria away. Each kit has a premium antimicrobial cloth that has been specifically designed to clean delicate finishes. The pack also includes a 32ml Device Cleaner spray bottle containing an advanced pH balanced, eco-friendly cleaning formula that gives a streak-free finish. - Formulated using deionized water and is pH neutral - Antimicrobial treatment includes silver ions to kill 99.9% of bacteria (fights bacteria, mold and fungi - Anti-odor cloth that stays fresh - Fast acting, eliminates 99.9% of bacteria in less than an hour - Cloth is Machine-washable and effective through as many as 100 washes

Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Aqua Proof Paste is the magic goop for installing bottom brackets and keeping them quiet. In the Kogel office, it's known as 'Shut up Grease'. Aqua Proof was developed by Morgan Blue from Belgium for the offshore industry. It's saltwater resistant, does not degrade over time, and is a long-time favorite of the UCI world tour mechanics. It works on any pressed or threaded surface to avoid corrosion. You'll find yourself using it for a lot more than just installing bottom brackets. The 5ml size is for a single bottom bracket installation, the 200ml jar will last a long time, even for professional use. - Recommended for all bottom-bracket installations - Also works on thread and headset installation - 5ml syringe is enough for a single installation - 200ml jar for shop use

High-performance brake and clutch fluid designed to lubricate and protect critical brake system componentry while providing reliable stopping power. Anti-vapor lock formulation maintains responsiveness and performance by fighting both water contamination and vaporization. Advanced chemistry resists corrosion, and oxidation and is compatible with SBR, EPDM, and natural rubbers. Exceeds the requirements of US FMVSS 116 DOT 5.1, DOT 3 & DOT 4, SAE J1703, SAE J1704, and ISO 4925 (Classes 3, 4 and 5.1). For use in all hydraulic clutch systems and all brake systems specifying DOT 5.1 brake fluids. Do not use in DOT 5 silicone brake systems or mix with silicone-based fluids. Features: - For use in all vehicles specifying DOT 5.1 brake fluid. - Durable and reliable stopping power. - Anti-vapor lock formulation maintains a responsive lever and pedal feel. - Resists corrosion, oxidation, and boil-off. - Mixes with other DOT 3, DOT 4, and DOT 5.1 brake fluids. - Exceeds US FMVSS 116 DOT 5.1, DOT 3 & DOT 4, SAE J1703, J1704 and ISO 4925 (Classes 3, 4 and 5.1).

- Pro bleed kit for mineral oil brakes - Includes 2 syringes/2 M4 fittings, bleed block, Torx tool, crowfoot

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Prestacycle One is a complete Lubrication and Cleaning product for your Bicycle. It is Bio-based and USDA Certified. As a lubricant, it is so good it broke the ASTM 4 Ball Wear test. As a cleaner, degreaser and corrosion protectant, it provides the ultimate in bicycle care, all in one environmentally friendly package. Uses: - Dry Lube - Wet Lube - Bike Wash - Degreaser - Rust Remover - Rust Preventer - Anti-Seize - Paint Protectant - Metal Polish - Leather Conditioner Performance: - Substantially reduces friction improving pedaling, shifting and drive train performance - Sheds water - Clean, Lube and Protect with one product - Improved lubrication and wear resistance even when run dry - Temperature performance range from -48F to +600F - Extends chain life - Seasons chains and cables after 3-4 applications - State of the art penetrating characteristics - Road, Track, Gravel, CX, MTB, BMX & eBike - Motorcycles - Skateboards Technical: - State of the art Sub-Micron formulation enables the product to be run wet or dry for all riding conditions - Not vegetable oil or vegetable ester based. Will not dry out or gum up - No thermal decomposition even in extreme riding conditions - No Petroleum - No Alcohol Environmental: - Green Engineered - Bio-based Product - Non-Toxic - Biodegradable - USDA Certified - Made in the USA with USA raw ingredients Meets or Exceeds: - MIL-PRF-6340E ASTM D93 Flash Point - MIL-PRF-6340E ASTM D445 Kinematic Viscosity 104 F - MIL-PRF-6340E ASTM D4172 Wear Preventative Characteristics - MIL-PRF-6340E ASTM D5620 Load Carrying Capacity Jaw Load - MIL-PRF-6340E ASTM Corrosion Production - ASTM D 5183, Determination of the Coefficient of Friction for Lubricants: No Fail

Finish Line's Premium Grease With Teflon is a race-proven lubricant formulated for the unique demands of bicycle bearings. It's exceptionally strong and thick, it doesn't separate and it repels water even when submerged. Rated "5 Chainrings, Exceptional Grease" by Bicycling Magazine, it's very slick and very tough and lasts as much as 5 times longer than petroleum grease.

Regular lubrication of bicycle chains addresses annoying squeaks and noises, and extends the life of the chain and drivetrain components. Formulated using a proprietary blend of oils, Park Tool CL-1.2 Chain Lube works great in wet or dry conditions. It penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion. Compatible with all bicycle chains. Also works great as general-purpose light lubricant for use on bicycle brake and derailleur cables and housing, spoke nipples, and derailleur and brake pivots. - 4 fl. oz. (118 mL) bottle NOTE: Some painted surfaces can be sensitive to oil and grease. Clean off any excess oil or grease immediately. Test first on an inconspicuous area to see if it causes a stain or discoloration.

- Professional strength cleaner specifically designed to remove grease, oil and other contaminants from electrical components - Unique and proprietary formulation displaces moisture and is completely non-corrosive and non-staining - CFC-free and VOC compliant cleaner safely cleans electrical components, dries quickly and leaves behind no moisture, residue or film

Our Classic ORIGINAL chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. - “Riding in” forms an extremely low-friction plating. - Plating bonds to chain; can’t be washed off! - Components stay cleaner, last longer, and run quieter. - Extremely durable, outlasts all other chain lubes! - Environmentally sensitive and saves money. - To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Original BCL is more concentrated for exceptional durability under the most challenging conditions. The two formulas are compatible and may be used interchangeably. We recommend the Original Bicycle Chain Lube for mountain bikes, cyclo-cross, and more extreme conditions. You can confidently use Dumonde Tech’s Bicycle Chain Lube on all cables, pivots points, and seals. Safe on plastic, rubber, all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions..

DOT Disc Brake Assembly Grease is specially formulated for DOT-fluid brake systems. - Recommended for lever pistons, hose compression nuts, threaded barbs, and olives

Dirty drive train? We have you covered. Bike and wheels covered in mud? No problem! This is the perfect basic kit to clean and lube your bike. - 1 Liter Bike Wash - Bio-Degreaser, 500ml - 50ml Bio Dry Lube - Claw Brush

- Frees seized parts - Disperses moisture to prevent rust and corrosion - Provides light lubrication for moving parts - Reduces metal-to-metal contact - Prevents dirt adhesion - Cuts down on friction to improve component efficiency

This classic pink Bike Cleaner has incredible cleaning power because it contains Nano Technology that breaks down dirt and grime on microscopic levels, while also caring for your bike's delicate finish. Muc-off's pink cleaner is biodegradable, free from acids, CFC's and solvents, and it's alkaline based so you can clean away with a guilt-free conscience. It's safe on all surfaces, and it's even disc brake rotor and pad friendly. - Safe on all parts and surfaces including carbon fiber - Will not harm seals, cables, brake pads or rotors - Effective road bike & mountain bike cleaner - Safe on anodized metal - Alkaline based and free from CFCs, solvents or acids - Nano Tech Formula cleans on a molecular level - Biodegradable - Dispenser tap available separately, LU1700